Table of Contents
Advertisement
Quick Links
Nilfisk VT60A
Compressed Air Vacuum
Specifications
Minimum Compressor Required
Air Hose Diameter
Input Supply Air
Input Supply Air
Maximum Output Airflow
Maximum Waterlift at Control Pressure inches
Air Performance
Tank Capacity
Collection Capacity
Filter Area
Dimensions (L x W x H)
Container Diameter
Weight with Trolley
Sound Level
NILFISK-ADVANCE AMERICA, INC., 300 Technology Drive, Malvern, PA 19355, 1-800-645-3475, www.pa.nilfisk-advance.com
h.p.
inches
psi
cfm
cfm
air watts
gallons dry bulk
gallons dry bulk
square inches
inches
inches
lbs
dB(A) at 6'6"
20
½
90
70
140
172
392
15
10
2215
21½ x 25¼ x 37½
16 1/8
52
77
Advertisement
Table of Contents
Related Manuals for Nilfisk-Advance VT 60A
Summary of Contents for Nilfisk-Advance VT 60A
-
Page 1: Specifications
Nilfisk VT60A Compressed Air Vacuum Specifications Minimum Compressor Required h.p. Air Hose Diameter inches ½ Input Supply Air Input Supply Air Maximum Output Airflow Maximum Waterlift at Control Pressure inches Air Performance air watts Tank Capacity gallons dry bulk Collection Capacity gallons dry bulk Filter Area square inches... -
Page 2: Machine Setup
FOLLOW THE INSTRUCTIONS FOR “HAZMAT” AS OUTLINED BELOW. MACHINE SETUP Your new VT 60A vacuum cleaner is shipped with the trolley and handle assembly installed. For removal and installation of the vacuum from the trolley, please refer to the instructions below. - Page 3 If the VT 60A loses suction power during work, there may be several reasons. The most likely reason is a full container. If the container is filled with liquid, suction will be cut off abruptly as the ball float valve closes off airflow;...
-
Page 4: Filter Replacement
The VT 60A’s internal microfilter and HEPA are located directly under the venturi housing. Turn the ball valve OFF. Open the container clips and lift... - Page 5 1. Microfilter: The microfilter is a small white felt sock (photo 5) which fits over the HEPA filter housing. This filter should be checked periodically for dirt or discoloration, and should be changed whenever it is noticeably soiled (#616821). A. Simply loosen the metal clamp band with a screwdriver and pull the microfilter off the HEPA housing.
- Page 6 VT60A Accessories Polyliners (25/Pkg.) 017191-00 HEPA Replacement Cartridge 017276-31 10’ Plastic Hose Complete 017196-00 Double Curved Aluminum Wand 017193-00 14” Unfinished Floor Nozzle 017192-04 14” Wet Floor Nozzle 017192-00 3” Aluminum Dust Brush 017194-01 11” Plastic Crevice Tool 017195-00 Ring Adaptor for standard 55 gallon drum Tool Box with Mounting Bracket 017198-00...
- Page 7 WARRANTY The Nilfisk companies warrant that Nilfisk equipment will be free of defects in workmanship or material for a period of two years from the date of delivery. Should any failure to conform to this warranty appear, the Nilfisk companies shall upon notification within such time period, correct such non-conformity, at its option, either by repairing any defective part or parts, or by replacing a part or parts provided that the equipment is returned to an authorized Nilfisk service facility.
Need help?
Do you have a question about the VT 60A and is the answer not in the manual?
Questions and answers