Restoring Your Original Settings; Updating The Router's Firmware - Hercules Router 802.11G-54 User Manual

5.3.2. Restoring your original settings

If you have modified certain settings – whether intentionally or not – and wish to restore the original settings,
follow the instructions below.
During the restoration, all settings that you have previously modified (Internet connection mode, WiFi
security key, filtering by MAC address...) will be lost!

5.3.3. Updating the router's firmware

If you wish to take advantage of new functionalities or improved functionalities for your Hercules Router, we
recommend that you regularly visit the
are available.
We strongly recommend that you carry out firmware updates while connected by the gray Ethernet
cable (and not via WiFi).
During the update, all settings that you have previously modified (Internet connection settings, WiFi
security key...) will be lost!
If a firmware update is available:
- On the www.hercules.com
- On the Home page, click the Toolbox button.
- Select Restore original settings.
- Click the Restore now button.
You can also use the Reset button located on
the router:
- Disconnect the router.
- Press the Reset button 2 for 5 seconds using the tip of a
pen or pencil while reconnecting the router.
- Release the button and wait.
Your router will load its original settings and reinitialize itself.
www.hercules.com
website, click Support/Updates and Downloads.
Hercules Router 802.11G-54
website to check whether any firmware updates
User Manual – 73/82