Electrical Installation - mabe RMS1540Z Use And Care Manual

64
minimum electrical requirements:
Check the voltage
and frequency
characteristics in
accordance with your
country of residence.

electrical installation:

1. Install your refrigerator to the closest outlet. The use of an
extension cord is not recommended
2. Where possible, avoid connecting other electrical appliances
to the same outlet as your refrigerator while it's in use. This
will prevent fluctuations in voltage and overheating of the
refrigerator.
3. To connect and disconnect your refrigerator, take the cord
by the plug and remove it. Never pull on the cable.
4. Your refrigerator comes equipped with a type "Y" polarised
power cord, which includes a grounding cable. Do not
remove the ground prong by using a two-prong adaptor,
or cut the cable to replace the original plug for a two-prong
plug.
5. If you live in a region where there are voltage and frequency
variations, don't connect your refrigerator into the outlet.
You must install an automatic voltage regulator with a
minimum power of 500 Watts for 1000 Watts. Make sure the
regulator can handle your region's variations in tension.
6. If the supply cord is damaged, it must be replaced by
the manufacter, its service agent or similarly qualified
persons in order to avoid a hazard.
important:
Ignoring the above-mentioned advice places the
responsibility for any personal or material risk
entirely with the customer.
Country
Mexico
Brasil
Europa
Medio Oriente
Peru
Ecuador
Venezuela
Colombia
Chile
El Salvador
Argentina
Canada
Nominal Characteristics
115 V ~ 60 Hz
127 V ~ 60 Hz / 220 V ~ 60 Hz
220 V - 240 V ~ 50 Hz
220 V - 50 Hz / 110 V ~ 60 Hz
220 V ~ 60 Hz
115 V ~ 60 Hz
115 V ~ 60 Hz
115 V ~ 60 Hz
220 V ~ 50 Hz
115 V ~ 60 Hz
220 V ~ 50 Hz
115 V ~ 60 Hz