Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have
reached the end of their working life. To take advantage of
this service please return your product to any authorised
repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of
our after-sales service and contacts are available on the
Internet at: www.2helpU.com.
hand/arm weighted vibration
EC declaration of conformity
OUTDOOR NOISE DIRECTIVE
Black & Decker declares that these products described
under "technical data" are in compliance with:
2006/42/EC, EN60335-1, EN60335-2-77
2000/14/EC, Lawn Mower, L < 50cm, Annex VI,
SNCH, 11, route de Luxembourg L-5230 Sandweiler,
Luxembourg Notified Body ID No.: 0499
Level of sound power according to 2000/14/EC (Article 12,
Annex III, L < 50cm):
(measured sound power)
Uncertainty = 3 dB(A)
(guaranteed sound power) 85 dB(A)
Uncertainty = 3 dB(A)
These products also comply with Directive 2004/108/EC. For
more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of Black
Vice-President Global Engineering
Black & Decker Europe,
210 Bath Road, Slough,
Berkshire, SL1 3YD