Related Manuals for Black & Decker GRC730
Summary of Contents for Black & Decker GRC730
- Page 1 GRC730...
-
Page 4: Know Your Machine
Lawnmower GRC730 This manual provides operating and maintenance instructions for the Black & Decker GRC730 cordless lawnmower. Know your machine Read this manual carefully. Observe all the recommended safety instructions before, during and after using your machine, and maintain your machine in good working order. - Page 5 • The GRC730 will have a run time under average cutting conditions of approximately 300m . This run time will vary upwards and downwards dependant upon grass conditions, cut height used and push speed.
-
Page 6: Unpacking And Assembly
Unpacking and assembly Your mower carton contains: • The mower and handle assembly. • One hardware bag containing: • Two safety keys (24). • Instruction literature. • Blade nut spanner (25). • Charger (26). • Battery strap (27). • One grassbag assembly (19) - see below for assembly instructions. -
Page 7: Charging Instructions
Charging instructions • Always charge your mower indoors in a well ventilated area, where it is dry and protected from the weather. • Charge mower in a location where the temperature is more than 5˚C (41 ˚ F) and below 40˚C (104˚F). Warning! Do not attempt to charge non-rechargeable batteries. - Page 8 How to use your machine (Fig. D & E) Important! Always observe all the relevant warnings when using your machine. Warning! Never attempt to operate your machine with one hand. You must guide your machine with both hands. Safety key •...
-
Page 9: Overload Protection
We recommend that the steel blade is sharpened or a new blade fitted at the beginning of the season. Replacement blades A6157 are available from Black & Decker dealers and service centres. Warning! When fitting a new blade use only the Black &... -
Page 10: Fault Finding
Fault finding If your mower does not operate correctly, use the following table to locate the problem. Problem Solution Mower does not run (a) Check to make sure safety key when switch lever has been inserted correctly. is activated (b) Remove the safety key, turn mower over and check that the blade is free to turn. - Page 11 ENGLISH EC Declaration of Conformity We declare that unit: GRC730 conforms to 89/392/EEC, EN55104, 89/336/EEC, 73/23/EEC, EN60335, EN55014 A weighted sound pressure @ 4m 80dB (A) A weighted sound power 91dB (A) Hand/arm weighted vibration <2.5m/s Brian Cooke Director of Engineering...
- Page 12 Australia New Zealand South Africa United Kingdom Part no: 372324-01 3/97.3 Black & Decker (A’asia) Pty Ltd 286-288 Maroondah Highway North Croydon, Victoria 3136 Black & Decker 483 Great South Road, Penrose, Auckland Powerdek Tool Distributors 22 Inglestone Road, Village Deep Johannesburg, South Africa Black &...
- Page 14 Part no: 372324-01 3/97.3...