Ec Declaration Of Conformity; Protecting The Environment; Technical Data - Black & Decker CLMA4825L2 Manual

Table of Contents

Available languages

ENGLISH

(Original instructions)

Problem

Possible solution

Mower runs but cutting

Has battery been fully charged? Press state of

performance is unsatis-

charge button.

factory, or does not cut

entire lawn.

Release bail handle to turn mower off. Remove

safety key and battery pack. Turn mower over

and check:

Blade for sharpness - Keep blade sharp.

Deck and discharge chute for clogging.

Wheel height adjustment may be set too low

for grass condition. Raise cutting height.

Mower is too hard to

Release bail handle to turn mower off. Remove

push.

safety key and battery pack. Raise cutting

height to reduce deck drag on grass. Check

each wheel for free rotation

Mower is abnormally

Release bail handle to turn mower off. Remove

noisy and vibrates.

safety key and battery pack. Turn mower on

side and check blade to ensure it has not been

bent or damaged. If blade is damaged, replace

with a BLACK+DECKER replacement blade.

If the underside of the deck is damaged, return

mower to a BLACK+DECKER Authorized

service center.

If there is no visible damage to the blade and

the mower still vibrates:

Release bail handle to turn mower off.

Remove safety key and battery pack.

Disassemble entire blade assembly as

described in the "Removing and installing

blade" section.

Remove any debris and clean each

piece.

Replace each piece as described in the

"Removing and installing blade" section.

If mower still vibrates, return the mower to

an authorized BLACK+DECKER authorized

service center.

Battery charger LEDs

Check plug connection.

not on.

Replace charger.

Mower not picking up

Chute clogged. Release bail handle to turn

clippings with bag.

mower off. Remove safety key and battery

pack. Clear chute of grass clippings.

Raise cutting height of wheels to shorten

length of the cut.

Bag full. Empty bag more often.

Protecting the environment

Separate collection. Products and batteries

marked with this symbol must not be disposed of

with normal household waste.

Products and batteries contain materials that can be recov-

ered or recycled, reducing demand for raw materials. Please

recycle electrical products and batteries according to local

provisions. Further information is available at

www.2helpU.com

Technical data

Input Voltage

No-Load Speed

Weight

Battery

Voltage

Capacity

Type

Charger

Input Voltage

Output Voltage

Current

Approx. charge time

= < 0,5 m/s

Black & Decker declares that these products described under

"technical data" are in compliance with:

2006/42/EC, EN60335-1:2012 + A11:2014 + A13:2017 +

A1:2019 + A14:2019 + A2:2019, EN60335-2-77:2010.

2000/14/EC, Lawn Mower, L < 50cm, Annex VI,

DEKRA Testing and Certification GmbH,

Dinnendahlstr. 9, 44809 Bochum Germany

These products also comply with directive

2014/30/EU,2011/65/EU.

CLMA4825L2 H1

36V

min

-1

net weight 21.24KG gross 25.95KG

min

Hand/arm weighted vibration value:

, uncertainty (K) = 1,5 m/s

(sound preasure) 75 dB(A)

uncertainty (K) = 3.0 dB(A)