Troubleshooting; Protecting The Environment - Black & Decker BEMW351 Manual

Table of Contents

Advertisement

Troubleshooting

If your appliance seems not to operate properly, follow the
instructions below. If this does not solve the problem, please
contact your local BLACK+DECKER repair agent.
Warning! Before proceeding, release the bail bar to turn
mower off and wait for the blade to stop.
Problem
Possible cause
Machine fails to
Power turned off.
operate.
Fuse faulty/blown.
Grass too long.
Thermal cut out
activated.
Machine functions
Thermal cut out
intermittently.
activated.
Machine leaves
Height of cut too low.
ragged finish or
Cutting blade blunt.
motor labours.
Underside of
machine clogged.
Blade fitted upside
down.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
Voltage
V
AC
Power inpurt
W
No-Load speed
min
-1
Height adjustment
mm
Blade length
mm
Weight
Kg
Hand/arm weighted vibration value:
= <2.5 m/s
, uncertainty (K) = 1.5 m/s
2
Sound pressure level at the operator's ear:
L
: 78.5 dB(A); K= 1.6 dB(A)
PA
Sound power level L
Possible solution
Turn power on.
Replace fuse.
Increase the height of
cut and move machine to shorter
grass to start.
Allow motor to cool and increase
height of cut.
Allow motor to cool and increase
height of cut.
Increase height of cut.
Replace the blade.
Check underneath the machine
and clear out as necessary
(always wear heavy duty gloves)
Refit blade correctly.
BEMW351 (Type 1)
230
1000
3500
23 - 63
320
7.8
.
2
: 91 B(A); K= 1.6 dB(A)
WA
(Original instructions)
EC declaration of conformity
%
MACHINERY DIRECTIVE
OUTDOOR NOISE DIRECTIVE
BEMW351 lawn mower
Black & Decker declares that these products described under
"technical data" are in compliance with:
EN 60335-1:2012 + A11:2014, EN 60335-2-77:2010
2000/14/EC, Lawn Mower, L < 50cm, Annex VI,
DEKRA Certification B.V. Meander 1051 / P.O. Box 5185
6825 MJ ARNHEM / 6802 ED ARNHEM, Netherlands
Notified Body ID No.: 0344
Level of accoustic power according to
2000/14/EC (Article 12, Annex III, L< 50cm):
measured sound power level L
guaranteed sound power level L
These products also comply with directive
2006/42/EC, 2014/30/EU, 2011/65/EU.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Black & Decker.
Black & Decker Europe, 210 Bath Road, Slough,
Guarantee
Black & Decker is confident of the quality of its products
and offers consumers a 24 month guarantee from the date
of purchase. This guarantee is in addition to and in no way
prejudices your statutory rights. The guarantee is valid within
the territories of the Member States of the European Union
and the European Free Trade Area.
To claim on the guarantee, the claim must be in accordance
with Black & Decker Terms and Conditions and you will need
to submit proof of purchase to the seller or an authorised
repair agent. Terms and conditions of the Black & Decker 2
year guarantee and the location of your nearest authorised
repair agent can be obtained on the Internet at www.2helpU.
ENGLISH
: 91 dB(A); K= 1.6 dB(A).
WA
: 93 dB(A).
WA
R. Laverick
Director of Engineering
Berkshire, SL1 3YD
United Kingdom
11/09/2018
13

Advertisement

Table of Contents
loading

Table of Contents