Saving Locations From The Map; Navigating To A Location; Navigating To Known Coordinates; Navigating Back To Start - Garmin Edge 1000 Quick Start Manual

From the home screen, select the status bar or swipe down
1
from the top of the page.
The connections page appears.
2 Select GPS > Mark Location >

Saving Locations from the Map

1 From the home screen, select Where To? >
Point.
Browse the map for the location.
2
Select the location.
3
Location information appears at the top of the map.
Select the location information.
4
Select > .
5

Navigating to a Location

From the home screen, select Where To?.
1
Select an option:
2
• Select Saved to navigate to a saved course, location, or
segment.
• Select Recent Finds to navigate to one of the last 50
locations you have found.
• Select Search Tools to navigate to a point of interest or
specific address (requires routable maps), or a city,
intersection, or known coordinates.
• Select to narrow your search area.
If necessary, select to enter specific search information.
3
Select a location.
4
Select RIDE.
5
Follow the on-screen instructions to your destination.
6

Navigating to Known Coordinates

From the home screen, select Where To? > Search Tools >
1
Coordinates.
Enter the coordinates, and select
2
3 Follow the on-screen instructions to your destination.

Navigating Back to Start

At any point during your ride, you can return to the starting
point.
Go for a ride (Going for a
1
During your ride, select anywhere on the screen to view the
2
timer overlay.
3 Select > Where To? > Back to Start.
Select Along Same Route or Most Direct Route.
4
5 Select RIDE.
The device navigates you back to the starting point of your
ride.

Stopping Navigation

Select anywhere on the screen to view the timer overlay.
1
10
.
> A Map
.
Ride).
Scroll to the map.
2
Select > .
3

Projecting a Location

You can create a new location by projecting the distance and
bearing from a marked location to a new location.
From the home screen, select Where To? > Saved >
1
Locations.
Select a location.
2
Select the location information at the top of the screen.
3
4 Select > Project Location.
Enter the bearing and distance to the projected location.
5
6 Select .

Editing Locations

From the home screen, select Where To? > Saved >
1
Locations.
Select a location.
2
3 Select the information bar at the top of the screen.
Select .
4
Select an attribute.
5
For example, select Change Elevation to enter a known
altitude for the location.
Enter the new information, and select
6

Deleting a Location

From the home screen, select Where To? > Saved >
1
Locations.
Select a location.
2
Select the location information at the top of the screen.
3
4 Select > Delete Location >

Planning and Riding a Route

You can create and ride a custom route. A route is a sequence
of waypoints or locations that leads you to your final destination.
1 From the home screen, select Where To? > Route Planner
> Add First Location.
Select an option:
2
• To select a saved location, select Saved, and select a
location.
• To select a location for which you recently searched,
select Recent Finds, and select a location.
• To select a location on the map, select Use Map, and
select a location.
• To browse for and select a point of interest, select POI
Categories, and select a nearby point of interest.
• To select a city, select Cities, and select a nearby city.
• To select an address, select Address, and enter the
address.
• To use coordinates, select Coordinates, and enter the
coordinates.
Select Use.
3
Select Add Next Location.
4
5 Repeat steps 2–4 until you have selected all locations for the
route.
6 Select View Route.
The device calculates your route, and a map of the route
appears.
TIP: You can select to view an elevation plot of the route.
Select RIDE.
7
.
.
Navigation