Deleting Files; Disconnecting The Usb Cable; Navigation; Locations - Garmin Edge 1000 Owner's Manual

Deleting Files

If you do not know the purpose of a file, do not delete it. Your
device memory contains important system files that should not
be deleted.
1
Open the Garmin drive or volume.
2
If necessary, open a folder or volume.
3
Select a file.
4
Press the Delete key on your keyboard.

Disconnecting the USB Cable

If your device is connected to your computer as a removable
drive or volume, you must safely disconnect your device from
your computer to avoid data loss. If your device is connected to
your Windows computer as a portable device, it is not necessary
to safely disconnect.
1 Complete an action:
• For Windows computers, select the Safely Remove
Hardware icon in the system tray, and select your device.
• For Mac computers, drag the volume icon to the trash.
2
Disconnect the cable from your computer.

Navigation

Navigation features and settings also apply to navigating
courses (Courses, page 4) and segments
• Locations and finding places
• Planning a route (Planning and Riding a Route, page
• Route settings (Route Settings, page
• Optional maps (Purchasing Additional Maps, page
• Map settings (Map Settings, page

Locations

You can record and store locations in the device.

Saving Your Location

You can save your present location, such as your home or
parking spot.
1
From the home screen, select the status bar or swipe down
from the top of the page.
The connections page appears.
2
Select GPS > Mark Location >

Saving Locations from the Map

1
From the home screen, select Where To? >
Point.
2
Browse the map for the location.
3
Select the location.
Location information appears at the top of the map.
4
Select the location information.
5 Select > .

Navigating to a Location

1 From the home screen, select Where To?.
2
Select an option:
• Select Saved to navigate to a saved course, location, or
segment.
• Select Recent Finds to navigate to one of the last 50
locations you have found.
• Select Search Tools to navigate to a point of interest or
specific address (requires routable maps), or a city,
intersection, or known coordinates.
Navigation
NOTICE
(Segments, page
(Locations, page 11)
12)
13)
12)
.
> A Map
• Select
3 If necessary, select
4
Select a location.
5 Select RIDE.
6
Follow the on-screen instructions to your destination.

Navigating to Known Coordinates

1
From the home screen, select Where To? > Search Tools >
Coordinates.
2
Enter the coordinates, and select
3
Follow the on-screen instructions to your destination.

Navigating Back to Start

5).
At any point during your ride, you can return to the starting point.
1
Go for a ride
12)
2
During your ride, select anywhere on the screen to view the
timer overlay.
3
Select > Where To? > Back to Start.
4
Select Along Same Route or Most Direct Route.
5
Select RIDE.
The device navigates you back to the starting point of your
ride.

Stopping Navigation

1
Select anywhere on the screen to view the timer overlay.
2
Scroll to the map.
3
Select >

Projecting a Location

You can create a new location by projecting the distance and
bearing from a marked location to a new location.
1
From the home screen, select Where To? > Saved >
Locations.
2
Select a location.
3 Select the location information at the top of the screen.
4
Select > Project Location.
5
Enter the bearing and distance to the projected location.
6
Select .

Editing Locations

1
From the home screen, select Where To? > Saved >
Locations.
2
Select a location.
3
Select the information bar at the top of the screen.
4
Select .
5
Select an attribute.
For example, select Change Elevation to enter a known
altitude for the location.
6 Enter the new information, and select
to narrow your search area.
to enter specific search information.
.
(Going for a Ride, page 3).
.
.
11