Operating Instructions; Emergency Stop Button On European Models; Clean Lint Screen/Compartment; Load Laundry - Primus DA11-15 Maintenance Manual

To reduce the risk of fire:
• DO NOT DRY articles containing foam rubber or similarly textured rubberlike materials.
• DO NOT DRY plastics, anything containing wax or chemicals such as mops and cleaning
cloths, or anything dry-cleaned at home with a dry-cleaning solvent.
• DO NOT TUMBLE fiberglass curtains and draperies unless the label says it can be done. If
they are dried, wipe out the cylinder with a damp cloth to remove particles of fiberglass.
To reduce the risk of serious injury, allow cylinder to stop before cleaning lint screen.
Emergency Stop Button on
European Models
(Manual Timer and OPL Micro Models Only)
IMPORTANT: All manual timer and OPL Micro
operated tumblers are factory equipped with an
emergency stop button located on the front panel.
Emergency Stop Button
1
Figure 2
To operate emergency stop button:
a. Press red emergency stop button to stop all
action.
b. To restart machine, pull red emergency stop
button out and press START pad or button.
NOTE: Activation of the emergency stop button
stops all machine control circuit functions, but
DOES NOT remove all electrical power from
machine.
70269601

Operating Instructions

WARNING
1
TMB1664N
Operating Instructions
IMPORTANT: Clean lint screen and lint
compartment daily. Failure to clean the lint screen
daily will result in higher than normal
temperatures that may damage laundry.

Clean Lint Screen/Compartment

Remove any accumulated lint from the lint screen and
compartment. Close panel tightly against tumbler
frame and lock panel securely, if applicable.

Load Laundry

Open loading door and load cylinder with laundry. DO
NOT OVERLOAD.
NOTE: Overloading causes slow drying and
wrinkling.
Close loading door. Tumbler will not operate with the
door open.

Determine Required Temperature

The type of fabric being dried will determine the
setting. Consult the fabric-care label or fabric
manufacturer to determine proper temperature setting.
IMPORTANT: Always follow the fabric care
instructions supplied by the garment
manufacturer.

Determine Control Type

Refer to the following pages and use the appropriate
instructions for the control type.
Stacked Tumblers Only: Use the correct coin slot and
control panel for the top or bottom cylinder.
W076
W412
11