1. Manuals
  2. Brands
  3. Primus Manuals
  4. Dryer
  5. DAM 9
  6. Service manual

Primus DAM 9 Service Manual

Industrial dryers
Hide thumbs
Table of Contents

Advertisement

Quick Links

DAM 9
SERVICE MANUAL
INDUSTRIAL DRYERS
PUBLICATION DATE: 02/01
516514

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DAM 9 and is the answer not in the manual?

Questions and answers

Related Manuals for Primus DAM 9

Summary of Contents for Primus DAM 9

  • Page 1 DAM 9 SERVICE MANUAL INDUSTRIAL DRYERS PUBLICATION DATE: 02/01 516514...

  • Page 3: Table Of Contents

    Table of Contents Section 1 – Safety Information 18. Ground Wires From Dryer Base To Wire Harness and To Ignition Control Locating an Authorized Servicer ......4 (Gas Models With Silicon nITRIDE Ignition System) ............21 Section 2 – Introduction Customer Service ............5 Section 5 –...
  • Page 4 43. Burner Housing and Heat Shroud ModelS HDE107*F1502 and HDE107*F1702 ...113 (Gas Models) ..........57 ModelS HDE107*G3003, HDE107*G3018 and SDE107*G3018 ..........114 44. Limit Thermostat ...........57 Model HDE007*F1702........115 To Test Heater Assembly (Electric Models)...57 ModelS HDE007*F3000, SDE007*F3000 and 45. Heating Element (Electric Models) ....58 UDE007*F3000 ..........116 46.

  • Page 5: Section 1 - Safety Information

    Section 1 Safety Information Throughout this manual and on machine decals, you will find precautionary statements (“CAUTION,” “WARNING,” and “DANGER”) followed by specific instructions. These precautions are intended for the personal safety of the operator, user, servicer, and those maintaining the machine. a DANGER Danger indicates the presence of a hazard that will cause severe personal injury, death, or substantial property damage if the danger is ignored.

  • Page 6: Locating An Authorized Servicer

    Section 1 Safety Information WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 7: Section 2 - Introduction

    Section 2 Introduction Customer Service If literature or replacement parts are required, contact the source from whom the machine was purchased or contact Alliance Laundry Systems at (920) 748-3950 for the name and address of the nearest authorized parts distributor. For technical assistance, call (920) 748-3121.

  • Page 8: Model Identification

    Section 2 Introduction Model Identification Information in this manual is applicable to these dryers. Electronic Coin Coin Coin Card Card Dryer Nonmetered Metered Electric Display Slide Drop Drop Reader Reader Model Model Model Heat Heat Control Ready Ready Installed Ready Installed HDE007*F1702 HDE007*F3000...
  • Page 9 Section 2 Introduction Electronic Coin Coin Coin Card Card Dryer Nonmetered Metered Electric Display Slide Drop Drop Reader Reader Model Model Model Heat Heat Control Ready Ready Installed Ready Installed SDE307*F1500 SDE407*F1500 SDE407*F3000 SDE407*F4350 SDE507*F1500 SDE607*F1500 SDE707*F1500 SDEA07*J1500 SDEA07*J3000 SDEA07*J4350 SDEB07*J1500 SDEF07*J1500 SDG009*F3000...

  • Page 10: How Your Dryer Works

    Section 2 Introduction How Your Dryer Works CYLINDER LINT FILTER HEATER EXHAUST DUCT D390SE3A The dryer uses heated air to dry loads of laundry. When the motor is started, the exhaust fan pulls room temperature air in through louvers at the rear of the dryer and over the heat source (burner flame for gas and heating element for electric).

  • Page 11: Section 3 - Troubleshooting

    Section 3 Troubleshooting WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 12: Unit Stops In Cycle; Quits After The First Few Loads; Has A Burning Smell; Cycles On Motor Thermal Protector

    Section 3 Troubleshooting WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 13: Motor Runs But Cylinder Does Not Turn

    Section 3 Troubleshooting WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 14: Heating Assembly Does Not Heat Or Burner Does Not Ignite

    Section 3 Troubleshooting WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 15: Igniter Does Not Glow (Gas Supply Sufficient) - Gas Models

    Section 3 Troubleshooting WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 16: Heater Assembly Or Burner Shuts Off Prematurely

    Section 3 Troubleshooting WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 17: Heater Assembly Or Burner Does Not Shut Off

    Section 3 Troubleshooting WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 18: Clothes Are Too Hot When Removed From Dryer

    Section 3 Troubleshooting WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 19: Ignition Control Flashes

    Section 3 Troubleshooting WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 20 Section 3 Troubleshooting WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 21: Section 4 - Grounding

    Section 4 Grounding WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 22: Metered And Nonmetered Models - Ground Wires From Rear Bulkhead To Accumulator Bracket Or Timer (Depending On Model) And From Cabinet Top To Control Panel

    Section 4 Grounding WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 23: Ground Wires From Rear Bulkhead To Timer Mounting Bracket And To Dryer Cabinet Top

    Section 4 Grounding WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 24 Section 4 Grounding Notes 516514...

  • Page 25: Section 5 - Service Procedures

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 26 Section 5 Service Procedures CONTROL SCREW HOOD CONTROL HOOD REAR COVER FABRIC SELECTOR SWITCH LOCKWASHER LOCKWASHER SCREW KEPS NUT CONTROL PANEL AND BRACKET ASSEMBLY SCREW KNURLED SCREW CAP SCREW PUSH-TO-START SWITCH ASSEMBLY INDICATOR LIGHT SWITCH KNOB ASSEMBLY GRAPHIC OVERLAY CABINET D310PE3A Figure 8 CONTROL PANEL, CONTROL HOOD AND CONTROLS...

  • Page 27: Graphic Overlay

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 28: Timer (Nonmetered Models)

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 29 Section 5 Service Procedures CONTROL HOOD LOCKWASHER SCREW KEPS TIMER TIMER CASE TIMER PLATE ASSEMBLY TIMER KNOB ASSEMBLY Y IN T IM INSTRUCTION STICKER LOCKWASHER SCREW SCREW SCREW CABINET D441P CARRIAGE BOLT Figure 9 NONMETERED TIMER 516514...

  • Page 30: Accumulator (Metered Models)

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 31: To Test Accumulator (Metered Models)

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 32: Electronic Control

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 33 Section 5 Service Procedures CONTROL AND SHIELD SCREW SCREW CONTROL CONTROL HOOD REAR PANEL HOOD LOCKWASHER CONTROL PANEL SCREW SCREW CAP SCREW GRAPHIC OVERLAY D340PE3B Figure 12 CONTROL PANEL, CONTROL HOOD AND CONTROLS (ELECTRONIC CONTROL MODELS) 516514...

  • Page 34: Coin Drop

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 35 Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 36 Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 37 Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 38 Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 39: Meter Case (Metered Models)

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 40 Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 41: Timer Case (Nonmetered Models)

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 42: Security Case And Card Reader

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 43 Section 5 Service Procedures SCREW SERVICE DOOR BRACKET SHIELD RETAINER SCREW CARD READER LOCKNUT LOCKWASHER CAP SCREW INSTRUCTIONS SECURITY CASE GASKET CONTROL HOOD LOCKNUT CABINET SCREW CARRIAGE BOLT D307PE3A Figure 30 SECURITY CASE AND CARD READER 516514...
  • Page 44 Section 5 Service Procedures SCREW CARD READER ASSEMBLY CONTROL PANEL DRY519S Figure 31 516514...

  • Page 45: Control Hood

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 46: Cabinet Top (Metered Models)

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 47: Lint Filter

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 48: Reversing Door Procedure

    Section 5 Service Procedures Reversing Door Procedure . . . The door on this dryer is completely reversible. To reverse door proceed as follows: D312S D310S D311S Pull bottom of door liner out, then Remove four hinge attaching Remove all nine screws. pull down, removing door liner screws.

  • Page 49: Inner And Outer Door Panels And Door Pull

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 50: Door Seal

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 51: Front Panel And Panel Seal

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 52 Section 5 Service Procedures SCREW HOLD-DOWN CLIP DOOR SWITCH FRONT PANEL LOCATOR SEAL STICKER DOOR CATCH NAMEPLATE HINGE HOLE PLUGS DOOR FRONT PANEL CATCH SCREW SCREW LOCATOR ACCESS PANEL SCREW D288PE3B Figure 37 516514...

  • Page 53: Door Hinges

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 54: Burner System Components (Gas Models)

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 55 Section 5 Service Procedures HEAT BURNER SHROUD SCREW HOUSING SENSOR HEATER ATTACHING SCREW ATTACHING SCREWS BURNER TUBE SCREW IGNITER WIRES DISCONNECT BLOCK SECONDARY COIL LEAD-IN HOLDING PIPE BOOSTER COIL SENSOR VALVE SENSOR NIPPLE SHUT-OFF TERMINALS UNION VALVE (Shown in closed position) D241SE3F SILICON CARBIDE IGNITION SYSTEM SCREW...

  • Page 56: To Test Gas Valve Coils (Gas Models)

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 57: To Test Igniter (Gas Models)

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 58 Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 59: Burner Housing And Heat Shroud (Gas Models)

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 60: Heating Element (Electric Models)

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 61: Thermistor Or Thermostat

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 62: To Test Cycling Or Limit Thermostat

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 63 Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 64 Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 65 Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 66: To Test Drive Motor

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 67 Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 68 Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 69: Front Bulkhead Assembly

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 70 Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 71: Cylinder Belt

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 72: Cylinder Assembly

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 73: Rear Seal

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 74 Section 5 Service Procedures REAR OUTLET SEAL COVER REAR BULKHEAD ATTACHING SCREWS REAR BULKHEAD ATTACHING SCREWS CYLINDER ROLLER HEATER CYLINDER ROLLER EXHAUST DUCT SCREW D405SE3A Figure 58 516514...

  • Page 75: Cylinder Rollers

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 76: Rear Bulkhead And Heater Box

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 77 Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 78: Terminal Block Or Power Cord

    Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 79 Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 80 Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 81 Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 82 Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 83 Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 84 Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 85 Section 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 86 Section 5 Service Procedures RIVET RIVETS GUSSET SCREWS COIN METER BRACKET RIVET SCREWS SCREWS D420PE3A Figure 63 516514...

  • Page 87: Section 6 - Adjustments

    Section 6 Adjustments WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 88: Burner Flame (Gas Models)

    Section 6 Adjustments WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 89 Section 6 Adjustments SHUT-OFF AIR SHUTTER VALVE LOCKSCREW HANDLE SHUTTER D265SE3A 1/8" PIPE PLUG (For checking manifold pressure) SILICON CARBIDE IGNITION AIR SHUTTER LOCKSCREW SHUT-OFF VALVE HANDLE (Shown in Open Position) SHUTTER 1/8" PIPE PLUG (For checking manifold pressure) D363SE3A SILICON NITRIDE IGNITION Figure 65 516514...
  • Page 90 Section 6 Adjustments Notes 516514...

  • Page 91: Section 7 - Internal Wiring Of Dryer Motor Switch

    Section 7 Internal Wiring of Dryer Motor Switch WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. •...
  • Page 92 Section 7 Internal Wiring of Dryer Motor Switch Notes 516514...

  • Page 93: Section 8 - Wiring Diagrams

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 WIRING DIAGRAMS AND SCHEMATICS FOUND ON THE FOLLOWING PAGES ARE FOR MODELS COVERED IN THIS MANUAL.

  • Page 94: Model Sde707*F1500

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODEL SDE707*F1500 516514...

  • Page 95: Model Sde607*F1500

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODEL SDE607*F1500 516514...

  • Page 96: Models Sde407*F1500 And Sde507*F1500

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODELS SDE407*F1500 AND SDE507*F1500 516514...

  • Page 97: Models Sde107*F1500, Sde107*F1724 And Sde307*F1500

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODELS SDE107*F1500, SDE107*F1724 AND SDE307*F1500 516514...

  • Page 98: Model Sdg409*F3058

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODEL SDG409*F3058 516514...

  • Page 99: Model Sde009*F3058

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODEL SDE009*F3058 516514...

  • Page 100: Model Sde407*F4350

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODEL SDE407*F4350 516514...

  • Page 101: Model Sde407*A3000

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODEL SDE407*A3000 516514...

  • Page 102: Model Sde107*F4350

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODEL SDE107*F4350 516514...

  • Page 103: Model Sde007*F4350

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODEL SDE007*F4350 516514...

  • Page 104: Model Hdg709*F1102

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODEL HDG709*F1102 516514...

  • Page 105: Model Hdg509*F1102

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODEL HDG509*F1102 516514...

  • Page 106: Models Hdg109*F3000, Sdg109*F3000 And Sdg109*F5412

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODELS HDG109*F3000, SDG109*F3000 AND SDG109*F5412 516514...

  • Page 107: Models Hdg109*F1102 And Sdg109*F1124

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODELS HDG109*F1102 AND SDG109*F1124 516514...

  • Page 108: Models Hdg009*F3000, Sdg009*F3000 And Udg009*F3000

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODELS HDG009*F3000, SDG009*F3000 AND UDG009*F3000 516514...

  • Page 109: Models Hdg109*G3013 And Sgg109*G3013

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODELS HDG109*G3013 AND SGG109*G3013 516514...

  • Page 110: Model Hdg009*F1102

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODEL HDG009*F1102 516514...

  • Page 111: Model Hdg009*G3008

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODEL HDG009*G3008 516514...

  • Page 112: Models Hde707*F1502 And Hde707*F1702

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODELS HDE707*F1502 AND HDE707*F1702 516514...

  • Page 113: Models Hde507*F1502 And Hde507*F1702

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODELS HDE507*F1502 AND HDE507*F1702 516514...

  • Page 114: Models Hde107*F3000, Sde107*F3000 And Sde107*F5412

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODELS HDE107*F3000, SDE107*F3000 AND SDE107*F5412 516514...

  • Page 115: Models Hde107*F1502 And Hde107*F1702

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODELS HDE107*F1502 AND HDE107*F1702 516514...

  • Page 116: Models Hde107*G3003, Hde107*G3018 And Sde107*G3018

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODELS HDE107*G3003, HDE107*G3018 AND SDE107*G3018 516514...

  • Page 117: Model Hde007*F1702

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODEL HDE007*F1702 516514...

  • Page 118: Models Hde007*F3000, Sde007*F3000 And Ude007*F3000

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODELS HDE007*F3000, SDE007*F3000 AND UDE007*F3000 516514...

  • Page 119: Models Hde007*G3003, Hde007*G3008, Hde007*G3010 And Sde007*G3018

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODELS HDE007*G3003, HDE007*G3008, HDE007*G3010 AND SDE007*G3018 516514...

  • Page 120: Model Ude007*F3025

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODEL UDE007*F3025 516514...

  • Page 121: Model Udg009*F3025

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODEL UDG009*F3025 516514...

  • Page 122: Models Hdeb07*J1502, Hdeb07*J1702, Hdef07*J1502, Hdef07*J1702, Sdea07*J1500, Sdeb07*J1500 And Sdef07*J1500

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODELS HDEB07*J1502, HDEB07*J1702, HDEF07*J1502, HDEF07*J1702, SDEA07*J1500, SDEB07*J1500 AND SDEF07*J1500 516514...

  • Page 123: Models Hdgb09*J1102 And Hdgf09*J1102

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODELS HDGB09*J1102 AND HDGF09*J1102 516514...

  • Page 124: Model Sdea07*J3000

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODEL SDEA07*J3000 516514...

  • Page 125: Model Sdea07*J4350

    Section 8 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 MODEL SDEA07*J4350 516514...
  • Page 126 Section 8 Wiring Diagrams Notes 516514...

Table of Contents