Installing An Optional Car Seat - Bumbleride INDIE TWIN Operating Manual

Installing an optional car seat:

WARNING: Some car seats will not be compatible with this stroller. To verify whether your car seat is
compatible, install the car seat WITHOUT our child in the car seat. Visit www.bumbleride.com to nd a listing
of current compatible car seats.
Improper installation of a car seat in this stroller may result in serious injury or death. Read the manual
included with your car seat before using it with your stroller. Always secure your child with the car seat harness
when using a car seat in the stroller.
Always ensure that the safety belt is secured around the car seat before use.
Locate the multi-use bar holsters on either side of the stroller. Unzip the bumper bar cover from the multi-use
bar and install the bar into the stroller (1). Adjust the multi-use bar to position 2 for use with a car seat (2).
Fully recline the back rest to the attest position. Attach the safety belt to both d-rings on the inside of the
stroller (3). Leave the strap unbuckled. Place the car seat inside the seat of the stroller so that the back of the
car seat rests along the multi-use bar (4). Bring the safety belt over the car seat and buckle in place. Tighten
the safety belt. Lift up on the car seat to ensure that it is secure. Lift the backrest to its most upright position.
Lift the footrest to its most upright position.
1
3
13 | Bumbleride 1-800-530-3930 info@bumbleride.com www.bumbleride.com
2
Infant seat
adapter bar
position
Bumper bar
position
4
Adjuster Button