CHASSIS
5. Raise the fender and prop it slightly to access the
fasteners securing the brake pedal to the brake
control assembly (Fig. 155).
3
6. Install the two sets of fasteners securing the brake
pedal lever to the brake control assembly (Fig. 156):
A. Torx screw and washer
B. Hex head bolt, washer and nut
3-40
Fig 155
PICT-7131a
A A
B B
Fig 156
PICT-7132
7. Begin securing the fender to the frame by installing
2 screws located under the danger decal (Fig. 157).
Glue the cut decal pieces into place or replace the
decal.
Fig 157
8. Install the bolt, nut and washer securing the right
side of the fender to the frame and tighten (Fig. 158).
Fig 158
LX Lawn Tractor Service Manual
PICT-7130
PICT-7127a