Toro LX Lawn Tractor Service Manual page 24

CHASSIS
10. Apply electrical tape to secure the wire harness to
the plastic harness guide (Fig. 037).
3
11. Secure the wire harness to the right hand hood pivot
bracket with a cable tie (Fig. 038).
3-10
Fig 037 PICT-7464
Fig 038 PICT-7466
Note: The following steps, 12 thru 21, should be
done on both the right and left sides of the
axle.
12. Insert the axle assembly into the pivot axle (Fig.
039).
Fig 039
13. Position the ball joint into the axle assembly (Fig.
040).
Fig 040
LX Lawn Tractor Service Manual
PICT-7468a
PICT-7469a