Top Cover Removal - Motorola CDM Series Basic Service Manual

2-4
3. Pull the control head away from the radio assembly as shown in Figure 2-2.
4. Remove the flexible connection from the socket on the control head board.

2.6.2 Top Cover Removal

1. Insert the dismantling tool in the middle of the radio assembly side groove as shown in Figure 2-3.
2. Press on the dismantling tool until the snap connectors on the side of the cover release from the
radio chassis.
Dismantling
Tool
Figure 2-1: Typical Control Head Removal
Figure 2-2: Flexible Connection Removal
Flexible
Connection
Maintenance