Chapter 4
Radio Programming and Tuning Procedures
4.1
Introduction
This chapter provides an overview of the Customer Programming Software (CPS) and tuner program
designed for use in a Windows 95/98/NT environment. An installation instruction manual is also
included with each kit.
Customer Programming Software (CPS
Includes CPS and PPCPS
4.2
CPS Programming Setup
The CPS programming setups, shown in Figure 4-1 through Figure 4-3, are used to program the
radio.
Note: Refer to the appropriate program on-line help files for detailed programming proce-
dures.
Table 4-1: Software Installation Kit Radio Tuning Setup
Description
ACC
DC
RF
Programming
Cable
AARKN4081
RLN-4008
DB25
Figure 4-1: CPS Programming Setup with RIB
+
) CD
+13,2VDC
Power
Supply
DB15
RIB
Cable 3080369B72 (9 PIN)
Cable 3080369B71 (25 PIN)
Kit Number
HVN9025_
Tx Data
Rx
Data
Gnd
ZWG0130338-0
4-1