Uconnect™ Phone - Chrysler Town & Country 2010 User Manual

ELECTRONICS
uconnect™ phone
• The uconnect™ phone is a voice-activated, hands-free, in-vehicle communications
system.
• The uconnect™ phone allows you to dial a phone number with your cellular phone
using simple voice commands.
• Please refer to uconnect™ phone in the uconnect™ User's Manual on the DVD for
further details.
• Any voice commanded system should be used only in safe driving conditions
following local laws and phone use. All attention should be kept on the roadway
ahead. Failure to do so may result in an accident causing serious injury or death.
• Your phone must be turned on and paired to the uconnect™ phone to allow use
of this vehicle feature in emergency situations, when the cellular phone has
network coverage and stays paired to the uconnect™ phone.
NOTE: The uconnect™ phone requires a cellular phone equipped with the
®
Bluetooth Hands-Free Profile, Version 0.96 or higher. For uconnect™ customer
support, call 1–877–855–8400.
Phone Pairing
NOTE: Pairing is a one-time initial setup before using the phone. You will also need
to follow the Bluetooth instructions in your cell phone user guide to complete the
phone pairing setup.
• Press the Phone button
• Wait for the "ready" prompt and beep.
• (After the BEEP), say "uconnect setup".
• (After the BEEP), say "phone pairing".
• (After the BEEP) say, "pair a phone".
• Follow the audible prompts.
• You will be asked to create a four-digit PIN which you will later need to enter into
your phone (typically..settings, bluetooth, device, list, new).
• You will then be prompted to give the phone pairing a name (each phone paired
should have a unique name).
• Next you will be asked to give this new pairing a priority of 1 thru 7 (up to seven
phones may be paired).
Making A Phone Call
• Press the Phone button
• (After the BEEP), say "dial" (or "call" to a name).
• (After the BEEP), say number (or name).
WARNING!
to begin.
.
42