Uconnect® Phone - Chrysler TOWN & COUNTRY 2015 User Manual

E L E C T R O N I C S
Uconnect® Phone
The Uconnect® Phone is a voice-activated, hands-free, in-vehicle communications system with
Voice Command Capability that allows you to dial a phone number with your mobile phone using
simple voice commands (see Voice Command section).
• To determine if your vehicle is equipped with Uconnect® Phone, push the "Uconnect® Phone"
button located on the radio faceplate. If your vehicle has this feature, you will hear a
voice prompt. If not, you will see a message on the radio "Uconnect® Phone not available."
NOTE:
To access the tutorial, push the "Uconnect® Phone" button
Push any button on the faceplate, or press any button on the touchscreen, to cancel the tutorial.
• Refer to your vehicle Owner's Manual on the DVD for further details.
NOTE:
The Uconnect® Phone requires a mobile phone equipped with the Bluetooth® Hands-Free Profile,
Version 1.0 or higher. For Uconnect® Customer Support: U.S. residents - visit UconnectPhone.com
or call 1-877-855-8400. Canadian residents - visit UconnectPhone.com or call, 1-800-465-2001
(English) or 1-800-387-9983 (French). This site will provide specific instructions based on the
type of mobile phone being paired.
Phone Pairing
NOTE:
Pairing is a one - time initial setup before using the phone. Prior to starting the pairing procedure
ensure all additional phones within the vehicle have their Bluetooth® disabled.
1. Activate Bluetooth® on the phone you are pairing.
2. Push the "Phone"
3. Wait for the "ready" prompt and BEEP.
4. After the BEEP, say "setup" or "Uconnect device setup."
5. After the BEEP, say "device pairing."
6. After the BEEP, say "pair a device."
7. Follow the audible prompts.
• You will be asked to say a four-digit Personal
Identification Number (PIN), which you will
later need to enter into your mobile phone.
You can say any four-digit PIN. You will not
need to remember this PIN after the initial
pairing process.
• You will then be prompted to give the phone
pairing a name (each phone paired should have a unique name).
80
button to begin.
. After the BEEP, say "tutorial."
Mobile Phone Pairing