Remote Audio Controls - Chrysler Town & Country 2010 User Manual

ELECTRONICS

REMOTE AUDIO CONTROLS

VIDEO ENTERTAINMENT SYSTEM (VES)™
• The system may be controlled by the front seat occupants using either the radio or
DVD player controls, or by the rear seat occupants using the remote control.
• The video screen displays information in a split screen format. The left side of the
screen is referred to as Channel 1 and the right side of the screen is referred to as
Channel 2. All modes except video modes are displayed in a split screen format.
• To use the headphones, press the power button located on the right ear cup. Select
the channel on the headphones ( 1 or 2 ) which corresponds to the channel selected
on the desired video screen.
• To receive VES™ audio through the vehicle's sound system, press the VES™
soft-key on the radio's touch-screen.
• The switches are located on the rear
surface of the steering wheel.
Right Switch
• Press the switch up or down to increase
and decrease the volume.
• Press the button in the center to change
modes AM/FM/CD/SAT.
Left Switch
• Press the switch up or down to search for
the next listenable station or select the
next or previous CD track.
• Press the button in the center to select the
next preset station (Radio) or to change
CDs if equipped with a CD Changer.
System Operation
• The screen(s) are located in the overhead
compartment console. To lower a screen,
press the release button located in the
center of the console rear of the screen.
• The third row swivel screen (if equipped)
can be rotated to face the front of the
vehicle. The screen will only operate if it is
fully facing rearward or fully facing
forward. For the Third Row Swivel Screen
to work, the second row screen must be
fully opened.
36