Geo Prizm 1997 Owner's Manual page 254

3. Reach behind the headlamp assembly and find the
lock ring assembly.
4.
5.
6.
7.
Turn the lock ring assembly counterclockwise.
(It doesn't come off.)
Pull the bulb socket out of the housing.
Pull the connector apart to remove the bulb assembly.
Reverse the steps with a new bulb assembly.
Remember to replace the air duct if you replaced the
driver's side bulb.
0
Slide the outer part of the plastic clip into
Then push in the center of the clip.
the hole.
6-36