Disabling The Theft-Deterrent Feature - Geo Prizm 1997 Owner's Manual

4. Press the 1 and 4 buttons together. Hold them down
until
----
shows on the display.
5. Press the SEEK right or left arrow, or the TUNE
right or left arrow and 0000 will appear on
the display.
digit of your code appears. Release the button.
6. Press the SEEK left arrow and hold it until the first
7. Press the SEEK right arrow and hold it until the
second digit of your code appears. Release
the button.
8. Press the TUNE left arrow and hold it until the third
digit of your code appears. Release the button.
9. Press the TUNE right arrow and hold it until the
fourth digit of your code appears. Release
the button.
10. Press
AM-FM
after you have checked that the code
you entered is the one you wrote down. Then, REP
will appear on the display which means you need to
repeat Steps 5 through 9.
11, Press
AM-FM
again and the display will now
show SEC.
Disabling the Theft-Deterrent Feature
If your radio is secured (SEC shows on the display) and
you wish to disable it, enter your security code as
follows, pausing no more than 15 seconds
between steps.
1. Press the 1 and 4 buttons together. Hold them down
until SEC shows on the display. You are now ready
to enter your security code.
2. Press the SEEK left arrow and hold it until the first
digit of your code appears.
3. Press the SEEK right arrow and hold it until the
4.
Press the TUNE left arrow and hold it until the third
second digit of your code appears.
digit of your code appears.
fourth digit of your code appears.
5 . Press the TUNE right arrow and hold it until the
6. Press
AM-FM
after you have checked that the code
you entered matches the one you wrote down and
0000 should now appear on the display. You will
need to repeat the above procedure.
7. If the code is correct, the radio will now operate. If
the code is wrong, ERR will appear on the display.
3-16