Table of Contents
Advertisement
If you have anti-lock brakes, your windshield washer
fluid tank looks like this. Open the cap with the washer
symbol on it. Add washer fluid until the float in the tank
shows that it is full.
Brakes
Brake Fluid
Your brake master cylinder reservoir is here. It is filled
with DOT-3 brak h i d .
There are only two reasons why the brake fluid level in the
reservoir might go down. The first is that the brake fluid
goes down to an acceptable level during normal brake
lining wear. When new linings are put in, the fluid level
goes back up. The other reason is that fluid is leaking out
of the brake system. I f it is, you should have your brake
system
fixed,
since a leak means that sooner or later your
brakes won't work well, or won't work at
all.
6-30
Advertisement
Table of Contents
