Scoring; Mapping A Course - MGI NAVIGATOR GPS Maintenance/Service Manual Instruction Manual

1.18 Scoring

This feature is switched On or Off from the:
Sureshot Homepage > Features > Setup > Scoring
To begin scoring first select the hole you are hitting off from. If hitting from the
th
5 hole press the left arrow key until Hole 5 is displayed then follow the
following steps:
If scoring is switched Off the Fairway, Green, Putts and Sand soft keys are
not displayed.

1.19 Mapping a course

When mapping a course it is ideal to map all the hazards as well as the
greens. Good mapping involves taking account of relevant hazards and all greens in
sequence. There is no need to map tee off areas as your NavigatorGPS will always
tell you how far you [the NavigatorGPS] are to those hazards and greens that you
have mapped.
a. Turn on your NavigatorGPS. You will need to wait up to five minutes for the
Sureshotgps™ to lock in to the available satellites.
b. Press the Menu key.
c. Select Map Course using the down arrow.
d. Select Start Mapping and enter the full course name, for example,
Commonwealth Golf Club. Select the desired letters using the up/down and
left/right arrow keys. Press Save once complete.
e. Press the Map soft key to map the course or the Back soft key to return to the
previous display.
f. Using the up/down arrow keys select the hazard type of the first hazard which
appears on the first hole. Press the Select soft key.
g. Select from Left, Centre or Right to indicate where on the fairway the hazard
appears.
h. Walk to the front of the hazard, press the Front soft key. The Sureshotgps™
will count down from 10 seconds while it locks in the GPS position.
i. Walk to the Carry (back) of the hazard, press the Carry soft key. The
Sureshotgps™ will count down from 10sec while it locks in the GPS position.
j. Once complete, press the Done soft key.
k. Repeat this process for each hazard.
11