Instructions For Maintenance; Cleaning; Instructions For Use; Opening The Stroller - CYBEX CALLISTO User Manual

–
damages caused by the use of accessories not approved by CYBEX, such as rain
covers, buggy boards, bag hooks, etc. will not be covered by the terms of our
warranty.
– It may be unsafe to use replacement parts other than those approved by CYBEX.
–
Before using the stroller, always check whether the accessories are well secured.
–
Please make sure that the brake is locked while placing and removing the children.
– Never lift the stroller with the child inside; never ascend or descend stairs or escalators
with the child inside or when using other means of transportation.
–
When opening and closing the stroller, do not use force, as incorrect folding can
damage or break the stroller. Check the instruction manual if necessary.
–
drive carefully over curbs and gravel roads. The vehicle will be damaged by
repeated impact.
–
make sure your child does not use the footrest to stand on.
– do not expose the stroller to any artificial heat or direct sunlight.

INSTRUCTIONS FOR MAINTENANCE

–
The user is responsible for the regular maintenance of the stroller. All connecting parts
and rivets have to be tightened and secured properly. It is particularly important to
ensure that the locking and swiveling mechanism are treated regularly with Teflon
spray (dry lubricant). It is important that brakes, wheels and tyres are not impaired
during use. Inspect them regularly and repair or replace if necessary. STOP using any
product that does not appear structurally sound.
– do not make any modifications to the product. If you have any complaints or
problems, please contact your supplier or importer.
–
A service should be scheduled every 12 months.
–
You can also treat the other moving parts with Teflon spray (dry lubricant). After
spraying on the Teflon, wipe the product with a soft cloth.
–
Use only original CYBEX replacement parts. It may be unsafe to use substitutes.
–
The frame tubes covered by the locking mechanism and turning mechanism should
also be regularly cleaned and sprayed. This will ensure that you enjoy your stroller
without any problems.

CLEANING

–
do not use abrasives to clean the frame! Use a damp cloth and a mild detergent
and dry thoroughly.
– Should the stroller be exposed to salt water, please rinse it down with fresh (tap) water
as soon as possible afterwards.
–
Seat covers are machine washable at max. 30° C on delicate cycle. The canopy
can be hand washed with mild detergent at max. 30° C.
–
Please make note of the care label. do not tumble dry. Let covers dry completely
before reuse.
–
All CYBEX fabrics have been tested, but when the stroller is very wet, the water may
permeate the lining through the bottom edges and seams and leave water stains
on the upholstery. We advise you to use a rain cover to avoid this. Also please do not
fold or store the product while wet. If the stroller is wet, allow to dry with the canopy
extended. never store in a damp environment as this can cause mildew to form.
Note! Please wash the cover separately before you use it the first time. do not tumble dry
and do not expose to direct sunlight! do not iron!
ThIS PrOdUCT WAS APPrOvEd ACCOrdInG TO ThE
En1888:2012 STAndArd.

INSTRUCTIONS FOR USE

ImPOrTAnT: rEAd ThESE InSTrUCTIOnS CArEfULLY BEfOrE
USE And KEEP ThEm fOr fUTUrE rEfErEnCE. YOUr ChILd'S
SAfETY mAY BE AffECTEd If YOU dO nOT fOLLOW ThESE
InSTrUCTIOnS.

1. OPENING THE STROLLER

a) Before opening the pushchair the safety lock needs to be released.
b) After releasing the safety clip you can unfold the pushchair.
c) Step on the footboard until it locks in place with an audible click.
d) Please make sure that the handle bar is safely locked as well.
WArnInG: ChECK ThAT ThE SEAT UnIT ATTAChmEnT dEvICES
And CArrYCOT/CAr SEAT AdAPTErS ArE COrrECTLY
EnGAGEd.

2. ASSEMBING THE WHEELS

a), b) front wheel assembly.
c), d) e) rear wheel assembly. make sure that both mudguards point outwards.
f) After assembling the wheels the bowden brake cable can easily be lodged into the
designated slots.

3. AUTOMATIC FRONT WHEEL SWIVEL LOCKS

–
regardless of their position, the front wheels can be automatically locked into place
by stepping on the lock button (wait for an audible CLICK). To release the lock press
again until you hear a CLICK.

4. USING THE BRAKES

–
Tilt the lever located at the right wheel to secure the brake. To release the brake tilt
the lever again.
5. USING THE HARNESS SySTEM
a) To fasten the harness system insert left and right side fasteners into the central harness
buckle.
b) To tighten the belts pull the strap on the front of the central harness buckle.
c) To release the belt system press the release button located on the seat in front of the
belt lock while pulling at the shoulder belts.
d) To release the fasteners squeeze the grooves on left and right side of the central
harness buckle.
e) Adjust the length of the crotch strap with the corresponding slider under the seat
cover.
35