Head-Up Display - Cadillac STS 2008 Customer Convenience/Personalization Manual

76880_08a_STS_GTK:STS 2007 A
Warnings and Messages
If a problem is sensed in one of your
vehicle's systems, a warning or
message will appear on the DIC
display.
Note: Your vehicle's warnings and messages
provide critical information that can prevent
damage to your vehicle. Review your Owner
Manual to become familiar with the
information displayed and the action
required.
Check Engine or other Warning
Lights with OnStar ®
If your CHECK ENGINE light, or any
other warning message appears, you
can push the blue OnStar button and
speak to a live advisor. OnStar
Advisors can access certain
diagnostic information and can tell
you how serious the problem is,
what you should do about it, or can
contract a dealer or Roadside service
for you. Refer to the OnStar Owner
Guide for details.
See Section 3 of your Owner Manual
for detailed DIC system information.
S
5/11/07 4:14 PM
HEAD-UP DISPLAY (if equipped)
The Head-Up Display (HUD) projects
some important driver information
from the instrument panel cluster
(if equipped)
onto the windshield, reducing the
need to look away from the road.
The information appears as an image
toward the front of the vehicle. The
HUD displays the speedometer,
turn signal indicators, high-beam
headlamps indicator symbol,
adaptive cruise control features/
indicators, check gages icon, and
some radio and navigation features.
The HUD controls are located on the
left side of the instrument panel.
T S
Page 6
A
B
(Up/Down Adjustment):
Press this button (A) to adjust the
up/down position of the HUD image
on the windshield. (It cannot be
adjusted side-to-side.) Press the up
arrow to move the HUD image up
and the down arrow to move the
HUD image down.
Brightness: Use this knob (B) to
adjust the brightness of the HUD
image as well as the instrument
cluster and interior lighting. Press
and release the knob so that it pops
out, and then turn the knob to
increase or decrease the brightness
of the instrument cluster and interior
lighting. Pull out the knob to the
second detent in order to increase or
decrease the brightness of the HUD
image.
Off: With the knob (B) pulled out to
the second detent, turn it all the way
to the left to turn off the HUD image.
Adjust your seat to a comfortable
driving position before adjusting the
HUD image. If you change your seat
position, you may have to readjust
the HUD image for proper viewing.