Cadillac STS 2008 Customer Convenience/Personalization Manual page 12

76880_08a_STS_GTK:STS 2007 A
information is displayed in the
Head-Up Display.
(Off): Move the cruise control
switch to this position to turn off the
system (or apply your brake to
deactivate the set speed).
(On): Move the switch to this
position to turn on the system.
(Set/Decrease): Press this button,
located at the end of the
multifunction lever, to set the speed,
or to decrease the set speed when
the system is active.
+
(Resume/Increase): Move the
switch to this position to resume a
previously set speed, or to increase
the set speed when the system is
active.
S
5/11/07 4:15 PM Page 12
Selecting a Follow Distance (GAP)
Use the GAP button on the steering
wheel to adjust the distance between
you and the vehicle ahead of you.
T S
+
(Increase Follow Distance): Press
the top of the GAP button to increase
the follow distance.
–
(Decrease Follow Distance): Press
the bottom of the GAP button to
decrease the follow distance.
The
the Head-Up Display will illuminate
when a vehicle is detected in your
path. Adaptive Cruise Control will
adjust your speed to follow the
vehicle at the selected follow
distance.
Adaptive Cruise Control Alert
If driver action is required when
using Adaptive Cruise Control, the
(Adaptive Cruise Control Alert)
symbol on the Head-Up Display
flashes and a warning beep sounds.
This may occur when approaching a
vehicle too rapidly and the system
cannot apply sufficient braking.
Note: Adaptive Cruise Control will not apply
hard braking or bring the vehicle to a
complete stop, nor will it respond to
stopped vehicles. See Sections 3 and 4 of
your Owner Manual for more information.
(Vehicle Ahead) symbol on