Uniden iGO50 Owner's Manual page 90

6. Tap
will count down and the break timer shows its default value. If two drivers are
set, tap
7. When finished, tap and hold
Whenever the vehicle stops, the current driver receives a message a few minutes
later whether this stop means a break.
When a break is initiated, the continuous driving timer stops and it is reset to its
default value, the daily driving timer also stops, and the break timer starts counting
down (the break starts from the moment when the vehicle stopped). When the
vehicle is in motion again, the break timer is reset, and both driving timers start
counting down again.
Page 90
to see the timers. If the vehicle is moving, the driving timers
to switch between the two drivers.
to return to the Map screen.