Uniden iGO50 Owner's Manual page 106

Tap any of the profiles to set up its parameters. A new screen is displayed with the
attributes currently saved in the profile.
Tap any of the buttons to modify the following parameters:
Parameter
Name
Dimensions
Trailer
Axles
Weight
Freight
Max. Speed
You have two more functions on the main screen:
Button
Page 106
Tap this button to change the name of the profile. This name
helps you tell one profile from the others.
Tap one of these buttons to change the dimensions of the
lorry.The following parameters can be set:
• Length
• Width
• Height
Tap this button to set whether a trailer is attached to your lorry.
Tap this button to set the current number of axles under your
vehicle.
Tap one of these buttons to change the current or the
maximum allowed weight of the lorry.
The current freight of the lorry may contain hazardous
materials. Tap this button to select the hazard categories that
apply to your current freight.
Tap this button to set the maximum speed of the lorry. You
may decide to set the maximum speed allowed for your lorry
instead to avoid inaccurate routes due to missing or bad lorry
speed limit information in the map data.
Turn this switch on to be able to set the waiting time for all
waypoints of the route. This way your ETA calculation will take
into account the idle times and time dependent restrictions and
traffic patterns can also be considered for the whole route.
Description
Description