Uniden iGO50 Owner's Manual page 33

This function opens the Trip Monitor
screen where you can manage your
previously saved trip logs and track logs.
This function opens the list of
manoeuvres (the itinerary).
With this function you can save the
active route for later use.
With this function you can replace the
active route with a previously saved
route.
With this function you can search for
Places of Interest in various different
ways.
This function opens the Map screen
and starts simulating the active route.
This function opens the GPS
Information screen with satellite position
and signal strength information.
This button opens the Lorry settings
screen. This feature may not be
available if your current map does not
support lorry routes.
This button opens the Driving timer
configuration screen. The Lorry
Navigation feature may not be
available if your current map does not
support lorry routes.
More / Trip Monitor
(page 100)
Tap the top of the
Map screen during
navigation.
My Route / More /
Save Route
My Route / More /
Load Route
Find / Find Places
(page 49)
My Route / More /
Simulate Navigation
(page 85)
Tap the top of the Map
screen when there is
no GPS reception
More / Settings / Lorry
(page 87)
More / Settings / Lorry
/ Configure Driving
Timers (page 89)
Page 33