IKEA Livsgnista Instruction Manual page 14

ENGLISH
- tighten screw to reduce the flame height
(-);
- loosen screw to increase the flame height
(+).
The adjustment must be performed with the
tap in minimum gas setting position (small
flame ) .
- The primary air of the burners does not
need to be adjusted.
- At this stage, light up the burners and
turn the knobs from max position
minimum position
stability.
Upon completion of adjustment, reseal
the work surface using sealing wax or an
equivalent material.
NL
REFERENCE TO LOCAL
REGULATIONS
Installation must be performed in
accordance with standard NBN D 51-003.
to
to check flame
14