Table of Contents
Advertisement
86
If the caller had requested a change to an unsupported working channel, Unable
to Comply appears, indicating the radio could not comply with the channel
change request.
Log Entry Options
The DSC Call Logs provide additional options for each entry. When the prompt
appears PRESS [OK] FOR MORE OPTIONS, press the CH/OK knob. Select from the
following:
• Call Back. Makes a routine Individual Call to the caller listed in the entry.
• Delete. Remove this entry from the log.
• Save. Stores any undefined MMSI number into the Phonebook and enables
you to assign a corresponding name to it. If a name is already assigned for this
MMSI number in the phonebook, you are prompted to edit the name.
5.9 DSC Setup
The DSC Setup menu item is used to determine the following functions:
• the radio's MMSI ID number
• how your radio responds to a Position Reply request
• the radio's ATIS ID number
• whether the ATIS function is turned on or off
• whether your radio automatically changes channels for incoming Distress
and All Ships Urgency Calls
To adjust the DSC settings:
1. Press and hold the MENU/DSC key for 3 seconds to enter DSC Menu mode.
2. Rotate the CH/OK knob until the arrow points to DSC SETUP.
3. Press CH/OK to accept. The DSC Setup screen appears.
Make your selection from the following options:
• MY MMSI ID
• AUTO CH CHG
• POS REPLY
72
OPTIONS
>CALL BACK
DELETE
SAVE
Ray49E Marine VHF Radio
Advertisement
Table of Contents
