Position Reply - Raymarine Ray49E Owner's Handbook Manual

90

Position Reply

This option enables you to determine how your radio responds to a request for
your GPS position information (lat/lon) from another station.
To enable/disable Position Reply:
1. From DSC SETUP, rotate the CH/OK knob until the arrow points to POS REPLY.
2. Press the CH/OK knob to accept.
3. Rotate the CH/OK knob until the arrow points to your selection:
• AUTO sends out your vessel's position data as soon as it is requested.
• MANUAL sends out the data only after you respond to the request.
• OFF will not send position data under any circumstances, nor notify you
4. Press CH/OK to accept.
DSC SETUP
MY MMSI ID
>AUTO CH CHG
POS REPLY
AUTO CH CHG
ON
>OFF
that the request has been made.
DSC SETUP
MY MMSI ID
AUTO CH CHG
>POS REPLY
POS REPLY
AUTO
>MANUAL
OFF
73
73
77
77
Ray49E Marine VHF Radio
73
AUTO CH CHG
>ON
OFF
73
DSC SETUP
MY MMSI ID
>AUTO CH CHG
POS REPLY
77
POS REPLY
>AUTO
MANUAL
OFF
77
DSC SETUP
MY MMSI ID
AUTO CH CHG
>POS REPLY