Panasonic AG-CPD15P Operating Instructions Manual page 136

Specifications
Video
Inputs:
CAMERA1 x 1
1.0 Vp-p, 75 Ω, unbalanced
CAMERA2 (Pin jack) x 1
1.0 Vp-p, 75 Ω, unbalanced
Output:
VIDEO OUT (Pin jack) x 1
1.0 Vp-p, 75 Ω, unbalanced
Audio
Inputs:
AUDIO IN (Pin jack) x 2
–10 dBV, 47 kΩ, unbalanced
IN CAR MIC (Pin jack) x 1
–50 dBV, 3 kΩ, unbalanced
(plug-in power approx. 4 V)
Output:
AUDIO OUT (Pin jack) x 1
–6 dBV, 600 Ω, unbalanced
DC IN connector
SIGNAL port
Input voltage L:
Input current:
Other I/O connectors
• GPIO/SERIAL connector
D-Subminiature 25-pin
RS-232C
136
(continued)
1.0 V
H: 8 V- 28 V
1 mA (max.)
GPIO
Inputs: 8 ports
Input voltage L:
Input current:
Output: 1 port
(GPIO9 for Rec)
(open-emitter output)
Output voltage: 5.0 V
Output current: 15 mA
Time required to
detect changes: 100 ms
• CAMERA1 connector
16-pin, for AG-CK10P
• CONTROL PANEL connector
10-pin, for AG-RCP30P
• LAN connector
RJ-45, connected to a PC application
100 BASE-TX/10 BASE-T
• GPS-ANT. (OPTION) connector
GT5 connector for GPS antenna
(included in the separately sold AG-
CR12P)
• USB connector
USB A connector for USB memory
device
Compliant with USB Ver.1.1
Bus power current : 500 mA (max.)
Weight and dimensions are approximate.
Specifications are subject to change
without notice.
1.0 V
H: 4 V- 28 V
12 mA (max.)