Viewing The Status Of This Unit - Panasonic AG-CPD15P Operating Instructions Manual

Playback
(continued)

Viewing the status of this unit

Use the following function to see the
status of this unit or trigger signal
(GPIO1-8) status when a played back
file was recorded.
1. Press the [MENU] button.
The Menu appears.
2. Use the [ , ] buttons to select
[Setup/Info] and press [
confirm the entry.
3. Use the [ , ] buttons to select
[On Screen Type].
4. Use the [ , ] buttons to select
"AUTO", "SIMPLE", "DETAILS"
or "OFF".
AUTO : The simple On-Screen Display
appears for 3 to 5 seconds
when any of the following
items have been changed.
• Playback filename
• Mode indication
• Playback speed and
status indication
SIMPLE:
The Simple On-Screen Display
appears.
DETAILS:
The Detailed On-Screen Display
appears.
OFF:
On-Screen Display closes.
Notes:
• An administrator can set the
Overlay OSD (Init On Screen Type)
selected at power-on.
• See the next page for how to read
the On-Screen Display.
• When "AUTO" is selected and the
[BOOK MARK] button is pressed
or the bookmark position is
reached, the simple On-Screen
Display does not appear but the
bookmark icon
2 seconds.
] to
appears for 1 to
• When "AUTO" is selected and the
trigger position is reached, the simple
On-Screen Display does not appear
but the trigger icon
to 2 seconds.
appears for 1
69