Indicator Lamps And Recorder Status - Panasonic AG-CPD15P Operating Instructions Manual

Indicator Lamps and Recorder Status

This table shows the relationship between lamp Lit/Unlit/blinking states and the
recorder's operating status.
: Lit : Normal blinking
: Blinking consisting of short off intervals combined with long on intervals
Indicator Lamp
REC READY
(Red) (Green)
110
: Unlit
BUSY
(Red)
Status immediately after power-on
Recorder booting
Live video display
Normal recording
Intermittent recording
• Postrecording
• Including PC application operation
Administrator setting screen display with
recording stopped
(not accessing P2 card)
Administrator setting screen display with
recording stopped
(accessing P2 card)
Playing
• Terminating operation
• P2 card start processing (recognition when
inserted)
• P2 card shutdown processing (when a P2
card slot cover is opened)
Updating recorder firmware
• Updating microprocessors on the recorder
and Remote Control Panel
• Copying menu settings
Successfully copied the menu settings
Failed to copy menu settings
An error involving recording operations occurred
, or
during live screen display
• The recorder's P2 card slot cover is open
• No P2 card is inserted, or it is not recognized
• No more P2 card space available
• The write-protect switch of the P2 card is set
to "PROTECT"
<When using 16 GB or higher capacity P2 cards>
• A new unformatted card
• When the maximum number of recording
days or files has been exceeded
• When P2 card folders have been manipulated
on a PC
: Fast blinking (about three times/sec)
Recorder Status
∗
1
∗ ∗
1, 2
∗ ∗
1, 2
∗
1
∗
∗
3
4