Air Quality Engineering MiracleAir CM-12 User Manual

High performance hepa-type air cleaner

Advertisement

C O M M E R C I A L I N D O O R A I R Q U A L I T Y S O L U T I O N S
Miracle
High Performance HEPA-Type

Air Cleaner

MiracleAir Model CM-12 from Air Quality Engineering, Inc., is the ultimate
solution for indoor air pollution capturing both particulate and gaseous
contaminants. Odors, tobacco smoke, pollen, dust, vapors and many other
irritants are removed by high efficiency, long lasting disposable filters.
Manufacturer and Worldwide Distributor of Air Cleaning Systems for Over 30 Years

Advertisement

Table of Contents
loading

Summary of Contents for Air Quality Engineering MiracleAir CM-12

  • Page 1: Air Cleaner

    ™ High Performance HEPA-Type Air Cleaner MiracleAir Model CM-12 from Air Quality Engineering, Inc., is the ultimate solution for indoor air pollution capturing both particulate and gaseous contaminants. Odors, tobacco smoke, pollen, dust, vapors and many other irritants are removed by high efficiency, long lasting disposable filters.
  • Page 2: Table Of Contents

    TABLE OF CONTENTS PAGE SPECIFICATIONS PLANNING THE INSTALLATION ELECTRICAL INSTALLATION ELECTRICAL SCHEMATIC CHECKOUT MAINTENANCE PARTS LIST & DIAGRAM WARRANTY...
  • Page 3: Specifications

    TECHNICAL SPECIFICATIONS IMPORTANT! THE SPECIFICATIONS GIVEN IN THIS PUBLICATION DO NOT INCLUDE NORMAL MANUFACTURING TOLERANCES; THEREFORE, THIS UNIT MAY NOT MATCH THE LISTED SPECIFICATIONS EXACTLY. ALSO, THIS PRODUCT IS TESTED AND CALIBRATED UNDER CLOSELY CONTROLLED CONDITIONS AND SOME MINOR DIFFERENCES IN PERFORMANCE CAN BE EXPECTED IF THOSE CONDITIONS ARE CHANGED. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE IN THE INTEREST OF CONTINUING PRODUCT DEVELOPMENT.
  • Page 4 Additional ventilation may be required for toxic established in the room. When airflow patterns are not contaminants. In any event, the air cleaner must only immediately apparent, observe the smoke from a be used in areas that are ventilated for human cigarette in various locations within the room.
  • Page 5: Electrical Installation

    construct some type of framing strong enough to support the weight of the CM-12. 2. Remove the access panel inside the CM-12 cabinet. This panel is the galvanized unpainted The CM-12 may also be mounted using 3/8” [10 mm] diameter threaded steel rods available in many hardware stores.
  • Page 6: Electrical Schematic

    ELECTICAL SCHEMATIC...
  • Page 7: Checkout

    CHECKOUT Before leaving the installation, check to be sure that ASSEMBLY AND OPERATION the CM-12 is properly installed and operates correctly. 1. Be sure that the prefilter, primary particle filter and carbon filters are all properly installed. MOUNTING 1. The CM-12 is correctly and securely fastened to 2.
  • Page 8 2. With one hand supporting the filter near the turnstiles, rotate the two turnstiles to the open position. 3. Remove the filter from the unit and discard. It can not be vacuumed, washed or reverse air blasted. 4. Be extremely careful when handling the new filter.
  • Page 9: Parts List & Diagram

    PARTS LIST AND DIAGRAM...
  • Page 10: Warranty

    Product or the necessary parts shall rest solely with AQE. This 3-year limited warranty does not apply to main filter elements. Air Quality Engineering, Inc., will replace without charge the main filter elements during the period of thirty (30) days from the date of original purchase if the main filter elements fail to perform by reason of improper workmanship or material.

Table of Contents