Table of Contents
Advertisement
General Connection (without PoE)
1. If you have external devices such as sensors and
alarms, connect them to the general I/O terminal
block.
GND: Ground
DO2: Digital Output 2
GND
DO1: Digital Output 1
DO2-
DO1-
DO+
DO+: Digital Outupt (DC12V)
GND
GND: Ground
DI3
DI2
DI3: Digital Input 3
DI1
DI2: Digital Input 2
DI1: Digital Input 1
Power over Ethernet (PoE)
When using a non-PoE switch
Use a PoE Plus power injector to connect between the Network Camera and a non-
PoE switch.
2. Use the supplied RJ45 female/female coupler
to connect the Network Camera to a switch.
Use Category 5 Cross Cable when Network
Camera is directly connected to a PC.
(AC 24V 3.5A) Power Adapter
3. Connect the power cable from the
Network Camera to a power outlet.
IMPORTANT!
1. The camera is only to be connected to PoE
networks without routing to outside plants.
2. For PoE connection, use only UL listed I.T.E. with
PoE output.
PoE Plus Power Injector
VIVOTEK
Non-PoE Switch
User's Manual - 9
Advertisement
Table of Contents
