Table of Contents
Advertisement
VIVOTEK
Advanced Mode
Navigation Area
Configuration List
Click to switch to Basic Mode
Firmware Version
Each function on the configuration list will be explained in the following sections. Those functions that are
displayed only in Advanced Mode are marked with Advanced Mode . If you want to set up advanced
functions, please click
[Advanced Mode]
at the bottom of the configuration list to quickly switch over.
The Navigation Area provides an instant switch among Home page (the monitoring page for live
viewing), Configuration page, and multi-language selection.
System > General settings
This section explains how to configure the basic settings for the Network Camera, such as the
host name and system time. It is composed of the following two columns: System and System
Time.
System
Host name: Enter a desired name for the Network Camera. The text will be displayed at the top of the
main page.
Turn off the LED indicator: When checked, the onboard LED will be turned off if you do not want it to be
seen. There are cases when you do not want people to know if the camera is operating.
User's Manual - 29
Advertisement
Table of Contents
