Table of Contents
Advertisement
Port
HTTPS port: By default, the HTTPS port is set to 443. It can also be assigned to another port number
between 1025 and 65535.
Two way audio port: By default, the two way audio port is set to 5060. Also, it can also be assigned to
another port number between 1025 and 65535.
The Network Camera supports two way audio communication so that operators can transmit and receive
audio simultaneously. By using the Network Camera's built-in or external microphone and an external
speaker, you can communicate with people around the Network Camera.
Note that as JPEG only transmits a series of JPEG images to the client, to enable the two-way audio
function, make sure the video mode is set to "MPEG-4" or "H.264" on the Media > Video > Stream
settings page and the media option is set to "Media > Video > Stream settings" on the Client Settings
page. Please refer to Client Settings on page 26 and Stream settings on page 78.
Audio is being transmitted to the Network Camera
Video (TCP-AV)
IMPORTANT!
The network camera does not come with an embedded microphone. An externally connected
microphone is necessary, and hence the default audio is mute. If your connect a microphone, you
should deselect the audio mute checkbox in Media -> Audio setting page.
Click
to enable audio transmission to the Network Camera; click
microphone; click
to turn off the audio. To stop talking, click
FTP port: The FTP server allows the user to save recorded video clips. You can utilize VIVOTEK's
Installation Wizard 2 to upgrade the firmware via FTP server. By default, the FTP port is set to 21. It also
can be assigned to another port number between 1025 and 65535.
Talk Button
Mic Volume
2011/03/09 17:08:56
Mute
to adjust the volume of
again.
VIVOTEK
User's Manual - 57
Advertisement
Table of Contents
