Vivotek SD83x2E User Manual page 85

■ Event name: Enter a name for the event setting.
■ Enable this event: Select this option to enable the event setting.
■ Priority: Select the relative importance of this event (High, Normal, or Low). Events with a higher
priority setting will be executed first.
■ Detect next event after
input after a motion is detected.
Follow steps 1 to 3 to arrange the three elements -- Schedule, Trigger, and Action to configure an action
to take when an event is triggered. You can configure 3 event-triggered conditions.
1. Schedule
Specify the period of time for the event-triggering function to take effect. Please select the days of the
week and the time in a day (in 24-hr time format) for the recording schedule.
2. Trigger
This is the cause or stimulus which defines when to trigger the Network Camera. The trigger source can
be configured to use the Network Camera's built-in motion detection mechanism or external digital input
devices.
There are several choices of trigger sources as shown on next page. Select the item to display the
detailed configuration options.
■ Video motion detection
This option makes use of the built-in motion detection mechanism as a trigger source. To enable this
function, you need to configure a Motion Detection Window first. For more information, please refer to
Motion Detection on page 97 for details.
■ Periodically
This option allows the Network Camera to trigger periodically for every other defined minute. Up to 999
minutes are allowed.
■ Digital input
This option allows the Network Camera to use an external digital input device or sensor as a trigger
source. Depending on your application, there are many choices of digital input devices on the market
which helps to detect changes in temperature, vibration, sound, and light, etc.
■ System boot
This option triggers the Network Camera when the power to the Network Camera is disconnected.
■ Recording notify
This option allows the Network Camera to trigger when the recording disk is full or when recording
starts to rewrite older data.
seconds: Enter the duration in seconds to pause motion detection or digital
VIVOTEK
User's Manual - 85