G ~ A1 2Ch Direct/Stereo Custom - Denon AVR-688 Owner's Manual

Power On Level
This sets the volume set when the main zone's power is turned on.
[Selectable items]
Last
: Use the memorized setting from the last session.
– – –
: Always use the muting on condition when power
is turned on.
–80dB ~ +18dB
: Set the volume level when the power is turned on
in units of 1 dB.
Mute Level
This sets the amount of attenuation of the volume when the mute
mode is set in the main zone.
[Selectable items]
Full
: The sound is cut off entirely.
–40dB
: The sound is attenuated by 40 dB.
–20dB
: The sound is attenuated by 20 dB.
g ~ A1 2ch Direct/Stereo Custom
Make speaker settings for 2-channel mode playback.
[Display]
1 . S p 2 . I n 3 . O p
O p t i o n S e t u p
5 2 c h C s t m O F F
5 2 c h C s t m O N
6 2 c h F
7 2 c h S W
8 2 c h L F E
9 2 c h F L
1 0 2 c h F R
1 1 2 c h F r e q
Setting
To change the settings, select "ON" .
[Selectable items]
OFF
: Use the same settings as in "Speaker Setup" .
ON
: Make separate settings for 2-channel mode.
Front
Select front speaker size.
[Selectable items]
Large Small
: Select front speaker size.
Subwoofer
E
Select subwoofer use.
E
[Selectable items]
E
Yes No
: Select subwoofer use.
E
L a r g e
Subwoofer Mode
E
Y e s
Select low range signal to be reproduced by subwoofer.
E
[Selectable items]
N o r m
LFE (Normal) LFE+Main
E
1 2 f t
E Distance FL
1 2 f t
Set distance from listening position to front left speaker.
E
8 0
[Variable range]
Distance FR
Set distance from listening position to front right speaker.
[Variable range]
Crossover
Select crossover frequency from which subwoofer handles low range
signal.
[Selectable items]
40Hz 60Hz
200Hz 250Hz
: Select crossover frequency.
Operations (vpage 22)
ENGLISH
: Select subwoofer signal.
0ft ~ 60ft
0ft ~ 60ft
80Hz 90Hz 100Hz 110Hz 120Hz 150Hz