Ntp Client - D-Link DSL-2650U User Manual

DSL-2650U 3G/ADSL/Ethernet Router
with Wi-Fi and Built-in Switch
User Manual

NTP Client

On the System / NTP client page, you can configure automatic synchronization of the system
time with a time server on the Internet.
To enable automatic synchronization with a time server:
1. Select the Enabled checkbox.
2. Select your time zone.
3. Specify the needed NTP server in the NTP servers field or leave the server specified by
default.
4. Click the Change button.
When the router is powered off or rebooted, the system time is reset to the default value.
!
If you have set automatic synchronization for the system time, the internal clock of the
device will be configured after connecting to the Internet.
Figure 120. The System / NTP client page.
Page 131 of 139
Configuring via Web-based Interface