D-Link DSL-2650U User Manual page 55

DSL-2650U 3G/ADSL/Ethernet Router
with Wi-Fi and Built-in Switch
User Manual
When the WPA-PSK or WPA2-PSK value is selected, the WPA Encryption settings section is
displayed:
Figure 49. The WPA2-PSK value is selected from the Network Authentication drop-down list.
Parameter
Encryption Key PSK
WPA2 Pre-
authentication
WPA Encryption
WPA renewal
Click the Next button to continue.
When all the steps of configuring the WLAN are completed, the specified settings are displayed on
the page. Check their correctness and then click the Save button. After that you get to the quick
settings page.
A key for WPA encryption. The key can contain digits and/or Latin
characters.
The checkbox activating preliminary authentication (displayed only
for the WPA2-PSK authentication type).
An encryption method: TKIP, AES, or TKIP+AES.
The time period (in seconds), at the end of which a new key for
WPA encryption is generated. When the value 0 is specified for this
field, the key is not renewed.
Page 55 of 139
Configuring via Web-based Interface
Description