D-Link DSL-2650U User Manual page 97

DSL-2650U 3G/ADSL/Ethernet Router
with Wi-Fi and Built-in Switch
User Manual
To create a new rule for interface grouping (a group of ports), click the Add group button (the
button is not displayed if there is no WAN connection in the system).
You can specify the following parameters:
Parameter
Name
LANs
WANs
Click the Save button.
!
When you add an interface to the new group, it is excluded from the group to which it has
been assigned before.
To edit or remove an existing group, select the relevant group on the Advanced / Interface
grouping page. On the page displayed, change the parameters and click the Save button, or click
the Delete button. When you delete a group, interfaces assigned to it are reassigned to the
DEFAULT group.
Figure 82. The page for adding a new group of ports.
A name for the group for easier identification. You can specify any
name.
The list of available internal interfaces is displayed in the left
column of the line.
Use the button ==> to select interfaces. The selected interfaces will
be displayed in the right column of the field.
WAN connections to which the new group will be assigned. WAN
connections of PPPoA and IPoA type cannot be added to groups.
Use the button ==> to select WAN connections. The selected
connections will be displayed in the right column of the field.
Page 97 of 139
Configuring via Web-based Interface
Description