D-Link DSL-2650U User Manual page 91

DSL-2650U 3G/ADSL/Ethernet Router
with Wi-Fi and Built-in Switch
User Manual
Later you will be able to add wireless devices to the WLAN by pressing the WPS button of the
router.
1. Select the PBC method in the software of the wireless device that you want to connect to the
router's WLAN.
2. Click the relevant button in the software or press the WPS button on the cover of the
wireless device that you want to connect to the WLAN.
3. Press the WPS button of the router.
After clicking the button the WPS LED blinks. If the wireless device has been successfully
connected to the WLAN, the LED stops blinking and lights green for several minutes.
Page 91 of 139
Configuring via Web-based Interface