TANDBERG TacticalMXP User Manual page 8

TANDBERG Tactical MXP
Vibration
•
Do not operate the apparatus in areas with vibration or place it on an unstable surface (See
Operational Environment Testing above).
Power connection and Hazardous voltage
•
The product may have hazardous voltage inside. Never attempt to open this product, or any
peripherals connected to the product, where this action requires a tool.
•
This product should always be powered from an earthed power outlet.
•
Never connect attached power supply cord to other products.
•
In case any parts of the product has visual damage never attempt to connect mains power, or
any other power source, before consulting service personnel
•
The plug connecting the power cord to the product/power supply serves as the main
disconnect device for this equipment. The power cord must always be easily accessible.
•
Route the power cord so as to avoid it being walked on or pinched by items placed upon or
against it. Pay particular attention to the plugs, receptacles and the point where the cord exits
from the apparatus.
•
Do not tug the power cord
•
If the provided plug does not fit into your outlet, consult an electrician.
•
Never install cables, or any peripherals, without first unplugging the device from it's power
source.
•
*Always use the power supply (AC-DC adapter) provided with this product.
•
*Replace only with power supply (AC-DC adapter) specified by TANDBERG.
•
*Never connect attached power supply (AC-DC adapter) to other products.
Servicing
•
Do not attempt to service the apparatus yourself as opening or removing covers may expose
you to dangerous voltages or other hazards, and will void the warranty. Refer all servicing to
qualified service personnel.
•
Unplug the apparatus from it's power source and refer servicing to qualified personnel under
the following conditions:
- If the power cord or plug is damaged or frayed.
- If liquid has been spilled into the apparatus.
- If objects have fallen into the apparatus.
- If the apparatus has been exposed to rain or moisture
- If the apparatus has been subjected to excessive shock by being dropped.
- If the cabinet has been damaged.
- If the apparatus seems to be overheated.
- If the apparatus emits smoke or abnormal odor.
- If the apparatus fails to operate in accordance with the operating instructions
Accessories
•
Use only accessories specified by the manufacturer, or sold with the apparatus.
Communication lines
•
Never touch uninstalled communication wires or terminals unless the telephone line has been
disconnected at the network interface.
•
Do not use communication equipment to report a gas leak in the vicinity of the leak.
•
To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord (ISDN
cables).
* Applies to the following products: T150 MXP, T550 MXP, T770 MXP, T880 MXP, T990 MXP, T1500 MXP, T1000 MXP,
T2000 MXP, T3000 MXP Profile, Tandberg Codec 3000 MXP, Tandberg Tactical MXP, Edge 75/85/95 MXP.
viii