Table of Contents
Advertisement
TANDBERG Tactical MXP
Note! The system does not have a built-in network terminator. If the wall socket provides
you with an ISDN U-interface, an NT1 between the system and the ISDN line is needed, see
Appendix 10
for more information.
4. LAN cable
To connect the system to a Local Area Network (LAN), connect the cable labeled "LAN
Ethernet" to a suitable Ethernet port on the LAN.
5. DVI-I cable
For using a PC with your videoconferencing system, connect a PC to the codec with a VGA
cable. For more information, see
12
PC Presenter.
Advertisement
Table of Contents
