Menu Function Definitions - Philips Vari-Lite VL3015 Spot Luminaire User Manual

❋
VARI LITE VL3015 / VL3515 S

Menu Function Definitions

For easy reference, each possible menu item is listed alphabetically in the first column by its display
abbreviation. The second column follows with a definition of the abbreviation and then a third column
provides an explanation of its purpose and function.
Display Definition
10 Min 10 Minutes
30 Sec 30 Seconds
5 Min 5 Minutes
Address Address
All @1 All At Once
All SEQ All Sequence
Yellow Yellow
Cyan
Cal ON Calibration On
Chan XXX DMX Channel
Chg LumID Change
Luminaire ID
ColrMix Color Mixer
ColorWhl Color Wheel
Config System
Configuration
CTO CTO Function
Data DMX Data
Dimmer Dimmer
Disable Disable
Display Display
DMX
Download Download
Edge
Enable Enable
Encoder Encoder
FAIL Test Fail
FixGobo Gobo Wheel 1
Fixt Hrs Fixture Hours
Fixture Fixture
Frame XX Frame Side
Head Mtr Head Motor
74
L
POT UMINAIRE
Table 4-3: Menu Function Definitions
Purpose
Sets Menu Display to automatically shut off after 10 minutes of non-use.
Sets Menu Display to automatically shut off after 30 seconds of non-use.
Sets Menu Display to automatically shut off after 5 minutes of non-use.
Accesses option for setting luminaire DMX starting address.
Tests all internal mechanisms at once, in two steps.
Tests all internal mechanisms in sequence for X steps.
Specifies yellow color parameter for manual control (Manual) or testing (Test).
Cyan Specifies cyan color parameter for manual control (Manual) or testing (Test).
Configures arc luminaire so that lamp will strike after calibration.
Specifies DMX channel for display of current data value.
For future use.
Specifies color mixing mechanism for testing (Test).
Specifies color wheel for manual control (Manual) or testing (Test).
Accesses options for setting lamp, pan/tilt, and Menu Display defaults. Also
accesses lamp information such as number of hours used, along with its respective
reset function.
Specifies CTO (color temperature orange) parameter for manual control (Manual) or
testing (Test).
Accesses option for setting DMX address channel.
Specifies dimmer mechanism for manual control (Manual) or testing (Test).
Disables a function.
Accesses options for Menu Display illumination defaults.
DMX Accesses options for DMX system settings.
Initiates download of luminaire software.
Edge Specifies edge function for manual control (Manual) or testing (Test).
Enables a function.
Accesses pan/tilt encoders for diagnostic testing.
Indicates that a test has failed.
Specifies gobo wheel 1 (rotating gobo wheel) for manual control (Manual) and test-
ing (Test)
Displays total number of hours luminaire has been powered on.
Accesses luminaire information such as serial number, software version, and total
operation hours. Also accesses recalibration and download options.
Specifies individual shutter frames (Frame 1A, 1B, 2A, 2B, 3A, 3B, 4A, or 4B) in
shutter mechanism for manual control (Manual) and testing (Test)
Configures head movement options.
U ' M
SER S ANUAL
2 7 Au gu st 2 013 02 .9 679 .00 02 A