Sending A Call Alert Page - Motorola Astro APX Mobile 05 control head User Manual

Sending a Call Alert Page

Note: If the feature inactivity timer is enabled, your radio
automatically exits the feature when your radio is left
idle long enough for the time to expire. You will hear
the Menu Inactive Exit Tone upon feature exit.
Procedure:
Press the preprogrammed Quick Access (One-Touch) Call
Alert Paging button to send a page to the preprogrammed ID
and proceed to Step 5 of the procedure below.
OR
Follow the procedure below.
> <
1
or to PAGE.
2
Press the Menu Select button directly below PAGE.
> <
3
or to select the required ID.
4
Press the PTT button to send the page.
5
The display shows PAGING...<NUMBER> or <ALIAS>.
6
If the call alert page is sent successfully, four highpitch tone
sounds and the display shows ACK RECEIVED.
OR
If the call alert page is not acknowledged, a low tone sounds
and the display shows NO ACKNOWLEDGE.
7
The radio returns to the Home screen.
OR
58
English
Press the Menu Select button directly below OK to return to
the main screen for Contacts.
OR
Follow the procedure below.
> <
1
or to CALL.
2
Press the Menu Select button directly below CALL.
> <
3
or to select the required ID, press the PTT button to
initiate the call.
4
If the target radio does not respond after a preprogrammed
period of time, the display shows SEND PAGE?.
5
Press the Menu Select button directly below YES to send
the call alert page.
OR
Press the Menu Select button directly below NO to exit the
screen without sending the call alert page.
6
The display shows PAGING...<ALIAS>.
7
If the call alert page is sent successfully, a tone sounds and
the display shows ACK RECEIVED.
OR
If the call alert page is not acknowledged, a low tone sounds
and the display shows NO ACKNOWLEDGE.
8
The radio returns to the Home screen.
OR