Fitting The Cutting Head - Jonsered FR 2312 MA Operator's Manual

Fitting the cutting head

1 Push the cutting deck in and make sure the guide bolts fit
into the grooves on the deck frame, one on each side.
2 Fit the cutting deck's pipe together with the deck frame's
pipe.
3 Grip the front edge of the deck and slide it in.
4 Push the deck until you feel the pipes touch bottom.
5 Fit the belt according to the picture.
24 –
English
Maintenance
6 Tension the belt with the belt adjuster.
7 Install the belt cover.
8 Set the cutting deck height control in any of the positions
1-5.